LiftMaster Remote Programming: How to Program All LiftMaster Remotes

Want to know how to program your Liftmaster remote? This is your step-by-step LiftMaster remote programming guide. So keep reading

Undoubtedly, LiftMaster has been a household name when it comes to garage door openers for decades. People choose them over other brands because of how simple and straightforward it is to use. 

Programming a LiftMaster remote is a walk in the park. Just follow these simple steps and you will get your LiftMaster remote working with your garage door opener in no time.

How to Program a Standard LiftMaster Remote Control

Quick note: Before you begin to program your remote, make sure you have a light bulb installed in your garage door opener. It will indicate if your LiftMaster remote is programmed successfully. You will also need a step a ladder. Now let’s begin.

  1. Place your step ladder beneath your garage door opener and climb
  2. Locate the “Learn” button on your garage door opener. It is usually located at the back of the opener. You may need to open the light cover to find it.
  3. Now press the “Learn” button once. An LED light beside the button will turn on. Now your garage door opener is ready to receive a signal from the remote. You have up to 30 seconds.
  4. Now press and hold the button on your remote you want to assign to your garage door.
  5. Hold the button until your light bulb flicker. You can now release the button.

Now your LiftMaster remote is successfully programmed. To test if it worked, press the button again to see if your garage door opens. If it didn’t, repeat the steps.

This process works for all models of LiftMaster remote control, except the MAX series models. If you own a MAX model, follow the procedure below to program your remote.

Check out: Garage Door Repair Guide: Ways to Fix Common Garage Door Issues

How to Program a LiftMaster MAX Series Remote Control

If you own a 315MHz or a 390MHz garage door opener from LiftMaster, Craftsman or Sears Craftsman, then you are in luck. The MAX remote controls are pretty much compatible with any LiftMaster garage door opener out there. And the great thing about them is you can program them to control multiple devices at a time.

To program these remotes, follow these steps

  1. Locate the “Program” mode on your MAX series remote
    • On the 893MAX, the Program button can be found under the visor clip. Just take it the clip off and then press the button. The LED on the remote will turn on. Check gif above for reference.
    • The 890MAX has a small hole on the left side of the device. Insert a paper clip a safety pin to push the button. Once again, an indication LED will turn on.
    • The 895MAX also has a hole which is on the left side of the remote. Press and hold it in till the LED on the front turns on.
  2. Now press the “Learn” button on your garage door opener. The LED beside it will lit up, indicating that it is ready to receive a transmission.
  3. Press and release the button you want to use to control the door
  4. The light bulb on the bulb will flicker once the garage door opener is programmed successfully. If it does not blink, wait momentarily and press the button again. Repeat this process till the light bulk blinks
  5. Don’t press the button again once the light bulb flickers.
  6. Now press a different key on the remote to exit the programming mode.

Your LiftMaster MAX series remote has been successfully programmed. Test run by pressing the programmed button to see if the garage door opens.

Quick Read: How to Troubleshoot LiftMaster Garage Door Openers

LiftMaster Remote Compatibility Chart

The compatibility of a LiftMaster remote to a garage door opener is based on the color of the Learn button. Before you purchase a new LiftMaster garage door remote for your opener, do well to check the color of the Learn button first.

The Learn button pf LiftMaster, Chamberlain, Craftsman or Sears Craftsman garage door openers come in four different colors — yellow, purple, orange and green. Check out our compatibility chart below to know which remote controls will work with your opener.

NB: Legacy Remote Controls refers to remote which are currently not available for sale anymore.

LEARN Button Color

Compatible LiftMaster Models

Yellow

374UT

375UT

811LM

813LM

891LM

893LM

892LT

894LT

890MAX

893MAX

Legacy Remote Controls

375LM

895MAX

Purple

61LM

333LM

371LM

373LM

374UT

375UT

890MAX

892LT

894LT

Legacy Remote Controls

361LM

362LM

363LM

370LM

372LM

373P

373W

374LM

375LM

895MAX

Orange

374UT

375UT

890MAX

892LT

893MAX

894LT

971LM

973W

Legacy Remote Controls

375LM

895MAX

973LM

Green

374UT

375UT

890MAX

893MAX

Legacy Remote Controls

81LM

83LM

375LM

895MAX

Leave a Comment

Your email address will not be published. Required fields are marked *